Beer Fittings

A Beer Hex Nut is part of a key system assembly that includes a tailpiece and beer nut washer. The assembly fits the 5/8" thread on a standard Keg ...

An inexpensive essential component of any Draught Beer or On Tap beverage system. This neoprene beer nut washer should always be kept in your stock...

The 1/2" 304SS Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components such as...

This commercial grade 304SS Keg Coupler Shut-Off Valve allows you to stop the flow at the point where the beer exits the Keg Coupler. It's an easy ...

The 1/4" 304SS Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components such as...

The 3/8" 304SS Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components such as...

This 5/16"OD SS Coil x 5/16"OD push-fit union fitting is ideal for connecting hard metal tubing to hard plastic tubing. Or, if you would rather con...

This 3/8"OD SS Coil x 3/8"OD push-fit elbow fitting is ideal for connecting hard metal tubing to hard plastic tubing. Or, if you would rather conne...

This 304SS In Line Flow Control Valve is Commercial Grade and allows you to control the flow rate of your beverage. Fitted with 2-5/16" OD Push Fit...

This Wing Nut is part of an assembly that is connected to the Keg Coupler end of a jumper line.

A SS Beer Hex Nut is part of a key system assembly that includes a tailpiece and beer nut washer. The assembly fits the 5/8" thread on a standard K...

Secure the transition point of 2 beverage tubes with this 304SS wall mounted angled bracket with 3/8" Barbed Fittings.  

Secure the transition point of 2 beverage tubes with this 304SS wall mounted angled bracket. Add beer nuts, tailpieces and beer nut washers to comp...

Use this one piece fitting to connect 3/8" ID tubing to a 1/4" MFL threaded fitting like the one on your Corny Keg quick disconnect fitting.

There are a few uses for this 304SS 90° 3/8" x 3/8" Barbed Fitting.  This is a handy fitting to have on hand when a hard 90° turn is required in a ...

The 1/4" 304SS 90° Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components suc...

The 3/16" 304SS 90° Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components su...

You can easily switch from a Corny Keg to a Commercial Keg by installing this universal fitting on the beer outlet on your Keg Coupler.

The 5/16" 304SS Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components such a...

This SS clamp includes a SS band, SS screw and SS screw housing which will inhibit the formation of rust giving you years of trouble free use. This...

This SS clamp includes a SS band, SS screw and SS screw housing which will inhibit the formation of rust giving you years of trouble free use. This...

The 3/16" 304SS Barbed Tailpiece is used in conjunction with a Beer Hex Nut and Beer Nut Washer to connect tubing to other system components such a...